0 Items
4KVA 24V Inverter - H
Product Code: 3171, 3172, 3072 (Blue), 3073 (Green), 3122 (Black)
Rugged and Fast Charging Inverter.
Overview
| ₦ 247,100.00 |  |
 |
||
|
||||
Overview
PRAG H-Series Pure Sine Wave Inverter / Charger
PRAG H-Series Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 88%.
It is packed with unique features and it is one of the most advanced inverter/chargers in the market today.
It features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.
PRAG H-Series Inverter is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.
Features
- Easy to Install & Easy to Operate & Easy to Solve
- Designed to Operate under Harsh Environment
- DC Start & Automatic Self-Diagnostic Function
- Powerful Charge Rate Up to 120Amp (depending on model), Selectable From 0%-100%
- High Efficiency Design & “Power Saving Mode” to Conserve Energy
- 8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Batteries
- 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
- 8 ms Typical Transfer Time Between Utility & Battery, Guarantees Power Continuity
- 15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
- Battery DOD(Depth of Discharge) setting from 50% to 100%.
- SNMP remote monitoring (available as an option)
Buy this product through any of the following:
-
Telephone Order - Call 0803 2170 129
- Buyright Showrooms (Lagos, Port Harcourt or Abuja) Click Here
- Order from KONGA Click Here
- Order from JUMIA Click Here
Features
| Inverter Output | |
| Model | PT-INV-4KVA/5KW 24V-Color LED, Wall-H |
| Continuous Output Power | 3000W |
| Surge Rating(20s) | 9000W |
| Capable of Starting Electric Motor | 5HP |
| Output Waveform | Pure Sine wave/Same as input(Bypass mode) |
| Nominal Efficiency | >88%(Peak) |
| Line Mode Efficiency | >95% |
| Power Factor | 0.9-1.0 |
| Nominal Output Voltage rms | 100-110-120Vac / 220-230-240Vac |
| Output Voltage Regulation | ±10% RMS |
| Output Frequency | 50/60Hz ± 0.3Hz |
| Short Circuit Protection | Yes, Current Limit Function (Fault after 1sec) |
| Typical transfer Time | 10ms(Max) |
| THD | < 10% |
| DC Input | |
| Nominal Input Voltage | 12.0Vdc |
| ( *2 for 24Vdc, *4 for 48Vdc) | |
| Minimum Start Voltage | 10.0Vdc |
| Low Battery Alarm | 10.5Vdc / 11.0Vdc |
| Low Battery Trip | 10.0Vdc / 10.5Vdc |
| High Voltage Alarm & Fault | 16.0Vdc |
| High DC Input Recovery | 15.5Vdc |
| Low Battery voltage recover | 13.0Vdc |
| Idle Consumption-Search Mode | < 25 W when Power Saver On |
| Charge | |
| Input Voltage Range |
Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC |
| Output Voltage | Depends on battery type |
| Charger Breaker Rating | 30A |
| Max Charge Rate | 30 ± 5A |
| Over Charge Protection Shutdown | 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc) |
|
Charger curve(4 stage constant current) 4 step digital controlled progressive charge |
Battery types ( *2 for 24Vdc, *4 for 48Vdc) |
| Battery type | Float Vdc |
| Gel U.S.A | 13.7 |
| A.G.M 1 | 13.4 |
| A.G.M 2 | 13.7 |
| Sealed Lead Acid | 13.6 |
| Gel Euro | 13.8 |
| Open Lead Acid | 13.3 |
| Calcium | 13.6 |
| De-sulphation | 15.5 for 4hrs |
| Remote Control | Yes. Optional |
| Bypass & Protection | |
| Input Voltage Waveform | Sine wave (Grid or Generator) |
| Nominal Voltage | 230Vac |
| Low Voltage Trip | 184V/154V±4% |
| Low Voltage re engage | 194V/164V±4% |
| High Voltage Trip | 253V±4% |
| High Voltage re engage | 243V±4% |
| Max Input AC Voltage | 270VAC |
| Nominal Input Frequency | 50Hz or 60Hz (Auto detect) |
| Low Freq Trip | 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz |
| Low Freq re engage | 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz |
| High Freq Trip | 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz |
| High Freq re engage | 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz |
| Output Short circuit protection | Circuit breaker |
| Bypass breaker rating | 30A |
| Transfer switch rating | 40amp for UL |
| Max bypass current | 40amp |
| Mechanical Specification | |
| Mounting | Wall mount |
| Inverter Dimensions(L*W*H) | 598*218*179mm |
| Inverter Weight | 35KG |
| Shipping Dimensions(L*W*H) | 740*315*300mm |
| Shipping Weight | 37KG |
| Display | Status LEDs / Status LEDs+LCD |
| Standard Warranty |
1 Year |
Specifications
| Inverter Output | |
| Model | PT-INV-4KVA/5KW 24V-Color LED, Wall-H |
| Continuous Output Power | 3000W |
| Surge Rating(20s) | 9000W |
| Capable of Starting Electric Motor | 5HP |
| Output Waveform | Pure Sine wave/Same as input(Bypass mode) |
| Nominal Efficiency | >88%(Peak) |
| Line Mode Efficiency | >95% |
| Power Factor | 0.9-1.0 |
| Nominal Output Voltage rms | 100-110-120Vac / 220-230-240Vac |
| Output Voltage Regulation | ±10% RMS |
| Output Frequency | 50/60Hz ± 0.3Hz |
| Short Circuit Protection | Yes, Current Limit Function (Fault after 1sec) |
| Typical transfer Time | 10ms(Max) |
| THD | < 10% |
| DC Input | |
| Nominal Input Voltage | 12.0Vdc |
| ( *2 for 24Vdc, *4 for 48Vdc) | |
| Minimum Start Voltage | 10.0Vdc |
| Low Battery Alarm | 10.5Vdc / 11.0Vdc |
| Low Battery Trip | 10.0Vdc / 10.5Vdc |
| High Voltage Alarm & Fault | 16.0Vdc |
| High DC Input Recovery | 15.5Vdc |
| Low Battery voltage recover | 13.0Vdc |
| Idle Consumption-Search Mode | < 25 W when Power Saver On |
| Charge | |
| Input Voltage Range |
Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC |
| Output Voltage | Depends on battery type |
| Charger Breaker Rating | 30A |
| Max Charge Rate | 30 ± 5A |
| Over Charge Protection Shutdown | 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc) |
|
Charger curve(4 stage constant current) 4 step digital controlled progressive charge |
Battery types ( *2 for 24Vdc, *4 for 48Vdc) |
| Battery type | Float Vdc |
| Gel U.S.A | 13.7 |
| A.G.M 1 | 13.4 |
| A.G.M 2 | 13.7 |
| Sealed Lead Acid | 13.6 |
| Gel Euro | 13.8 |
| Open Lead Acid | 13.3 |
| Calcium | 13.6 |
| De-sulphation | 15.5 for 4hrs |
| Remote Control | Yes. Optional |
| Bypass & Protection | |
| Input Voltage Waveform | Sine wave (Grid or Generator) |
| Nominal Voltage | 230Vac |
| Low Voltage Trip | 184V/154V±4% |
| Low Voltage re engage | 194V/164V±4% |
| High Voltage Trip | 253V±4% |
| High Voltage re engage | 243V±4% |
| Max Input AC Voltage | 270VAC |
| Nominal Input Frequency | 50Hz or 60Hz (Auto detect) |
| Low Freq Trip | 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz |
| Low Freq re engage | 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz |
| High Freq Trip | 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz |
| High Freq re engage | 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz |
| Output Short circuit protection | Circuit breaker |
| Bypass breaker rating | 30A |
| Transfer switch rating | 40amp for UL |
| Max bypass current | 40amp |
| Mechanical Specification | |
| Mounting | Wall mount |
| Inverter Dimensions(L*W*H) | 598*218*179mm |
| Inverter Weight | 35KG |
| Shipping Dimensions(L*W*H) | 740*315*300mm |
| Shipping Weight | 37KG |
| Display | Status LEDs / Status LEDs+LCD |
| Standard Warranty |
1 Year |
| Inverter Output | |
| Model | PT-INV-4KVA/5KW 24V-Color LED, Wall-H |
| Continuous Output Power | 3000W |
| Surge Rating(20s) | 9000W |
| Capable of Starting Electric Motor | 5HP |
| Output Waveform | Pure Sine wave/Same as input(Bypass mode) |
| Nominal Efficiency | >88%(Peak) |
| Line Mode Efficiency | >95% |
| Power Factor | 0.9-1.0 |
| Nominal Output Voltage rms | 100-110-120Vac / 220-230-240Vac |
| Output Voltage Regulation | ±10% RMS |
| Output Frequency | 50/60Hz ± 0.3Hz |
| Short Circuit Protection | Yes, Current Limit Function (Fault after 1sec) |
| Typical transfer Time | 10ms(Max) |
| THD | < 10% |
| DC Input | |
| Nominal Input Voltage | 12.0Vdc |
| ( *2 for 24Vdc, *4 for 48Vdc) | |
| Minimum Start Voltage | 10.0Vdc |
| Low Battery Alarm | 10.5Vdc / 11.0Vdc |
| Low Battery Trip | 10.0Vdc / 10.5Vdc |
| High Voltage Alarm & Fault | 16.0Vdc |
| High DC Input Recovery | 15.5Vdc |
| Low Battery voltage recover | 13.0Vdc |
| Idle Consumption-Search Mode | < 25 W when Power Saver On |
| Charge | |
| Input Voltage Range |
Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC |
| Output Voltage | Depends on battery type |
| Charger Breaker Rating | 30A |
| Max Charge Rate | 30 ± 5A |
| Over Charge Protection Shutdown | 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc) |
|
Charger curve(4 stage constant current) 4 step digital controlled progressive charge |
Battery types ( *2 for 24Vdc, *4 for 48Vdc) |
| Battery type | Float Vdc |
| Gel U.S.A | 13.7 |
| A.G.M 1 | 13.4 |
| A.G.M 2 | 13.7 |
| Sealed Lead Acid | 13.6 |
| Gel Euro | 13.8 |
| Open Lead Acid | 13.3 |
| Calcium | 13.6 |
| De-sulphation | 15.5 for 4hrs |
| Remote Control | Yes. Optional |
| Bypass & Protection | |
| Input Voltage Waveform | Sine wave (Grid or Generator) |
| Nominal Voltage | 230Vac |
| Low Voltage Trip | 184V/154V±4% |
| Low Voltage re engage | 194V/164V±4% |
| High Voltage Trip | 253V±4% |
| High Voltage re engage | 243V±4% |
| Max Input AC Voltage | 270VAC |
| Nominal Input Frequency | 50Hz or 60Hz (Auto detect) |
| Low Freq Trip | 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz |
| Low Freq re engage | 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz |
| High Freq Trip | 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz |
| High Freq re engage | 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz |
| Output Short circuit protection | Circuit breaker |
| Bypass breaker rating | 30A |
| Transfer switch rating | 40amp for UL |
| Max bypass current | 40amp |
| Mechanical Specification | |
| Mounting | Wall mount |
| Inverter Dimensions(L*W*H) | 598*218*179mm |
| Inverter Weight | 35KG |
| Shipping Dimensions(L*W*H) | 740*315*300mm |
| Shipping Weight | 37KG |
| Display | Status LEDs / Status LEDs+LCD |
| Standard Warranty |
1 Year |
FAQ
×Add Review
×
