10KVA 48V Advanced Inverter-V

click to enlarge

Thumb Thumb Thumb Thumb Thumb Thumb Thumb

Product Advert

<a href='index.php?module=product&event=downloadcatlogo&id=130'>Download</a>

Product Code: 2981,3108

High Capacity & Fast Charging Pure Sine Wave Inverter

Overview

PRAG V-Series Pure Sine Wave Inverter

PRAG V-series Inverter/Charger Pure Sine Wave Inverter is a combination of an inverter, charger, and Auto-transfer switch into one complete system . It is packed with unique features and it is one of the most advanced inverter/chargers in the market today.

The inverter features an AC pass-through circuit, powering your home appliances from utility or generator power while charging the battery. When utility power fails, the battery backup system keeps your appliances powered until utility power is restored. Internal protection circuits prevent over-discharge of the batteries by shutting down the inverter when a low battery condition occurs. When utility or generator power is restored, the inverter transfers to the AC source and recharges the batteries.

It features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.

PRAG Inverter/Charger is equipped with a powerful charger of up to 120Amp (depending on Model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.

Features:

  • Battery Temperature Sensor (BTS)
  • Automatic Generator Starting (AGS)
  • Support Solar Panel with MPPT Function(optional)
  • Designed to Operate under Harsh Environment
  • DC Start & Automatic Self-Diagnostic Function
  • Compatible with Both Linear & Non-Linear Load
  • Easy to Install & Easy to Operate & Easy to Solve
  • Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
  • High Efficiency Design & “Power Saving Mode” to Conserve Energy
  • 8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Batteries
  • 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
  • 8 ms Typical Transfer Time Between Utility & Battery, Guarantees Power Continuity
  • 15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
  • Battery DOD(Depth of Discharge) setting from 50%-100%
  • SNMP remote monitoring (available as an option)

PRICE OPTIONS:

10KVA‐48V‐V + AC/DC Cables: N796,000
10KVA‐48V‐V + AC/DC Cables + Installation: N845,600
10KVA‐48V‐V + AC/DC Cables + Installation + 48 x 2V500AH Batteries + Rack: N6,534,000


796,000.00 Buy Now Buy Now
Warranty : 12 month(s)
Downloads: User Manual

Inverter Output

PT-INV-10KVA/8KW/48V-Color LED, Wall-V
8.0KW
24.0KW
Pure Sine wave/Same as input(Bypass Mode)
>88%(Peak)
>95%
0.9-1.0
100-110-120Vac / 220-230-240Vac
±10% RMS
50Hz ± 0.3Hz/60Hz ± 0.3Hz
Yes( 1sec after fault )
10ms(Max)
< 10%

DC Input

24.0Vdc / 48.0Vdc
*2 for 24Vdc, *4 for 48Vdc;
10.5Vdc / 11.0Vdc for 12Vdc Mode
10.0Vdc / 10.5Vdc for 12Vdc Mode
>16.0Vdc for 12Vdc Mode
15.5Vdc for 12Vdc Mode
< 25 W when Power Saver On.(Refer to Table )

Charger

Depends on battery type (Refer to Table 2.5.2)
40A
80 ± 5A
*2 for 24Vdc, *4 for 48Vdc;

BTS

Yes(Refer to the table ) Variances in Charging Voltage & S.D Voltage Base on the Battery Temperature.

Bypass & Protection

Sine wave (Grid or Generator)
230Vac
150VAC For 120Vac LV Mode;300VAC For 230Vac HV Mode;
50Hz or 60Hz
47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz
55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz
Circuit Breaker
Circuit Breaker
50A
80Amp for UL
Yes (Optional)
40Amp

Solar Charger (Optional)

12Vdc / 24Vdc / 48Vdc
15-30Vdc / 30-55Vdc / 55-100Vdc
40 ~ 60A
15A
< 10mA
( *2 for 24Vdc, *4 for 48Vdc)
0 ~ 40℃(Full load) 40 ~ 60℃(Derating)

Specifications

Wall Mount
588*415*200mm
76+2.5
760*540*410mm
62+2.5
Status LEDs / Status LEDs+LCD
1 Year

Overview

PRAG V-Series Pure Sine Wave Inverter

PRAG V-series Inverter/Charger Pure Sine Wave Inverter is a combination of an inverter, charger, and Auto-transfer switch into one complete system . It is packed with unique features and it is one of the most advanced inverter/chargers in the market today.

The inverter features an AC pass-through circuit, powering your home appliances from utility or generator power while charging the battery. When utility power fails, the battery backup system keeps your appliances powered until utility power is restored. Internal protection circuits prevent over-discharge of the batteries by shutting down the inverter when a low battery condition occurs. When utility or generator power is restored, the inverter transfers to the AC source and recharges the batteries.

It features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.

PRAG Inverter/Charger is equipped with a powerful charger of up to 120Amp (depending on Model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.

Features:

  • Battery Temperature Sensor (BTS)
  • Automatic Generator Starting (AGS)
  • Support Solar Panel with MPPT Function(optional)
  • Designed to Operate under Harsh Environment
  • DC Start & Automatic Self-Diagnostic Function
  • Compatible with Both Linear & Non-Linear Load
  • Easy to Install & Easy to Operate & Easy to Solve
  • Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
  • High Efficiency Design & “Power Saving Mode” to Conserve Energy
  • 8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Batteries
  • 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
  • 8 ms Typical Transfer Time Between Utility & Battery, Guarantees Power Continuity
  • 15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
  • Battery DOD(Depth of Discharge) setting from 50%-100%
  • SNMP remote monitoring (available as an option)

PRICE OPTIONS:

10KVA‐48V‐V + AC/DC Cables: N796,000
10KVA‐48V‐V + AC/DC Cables + Installation: N845,600
10KVA‐48V‐V + AC/DC Cables + Installation + 48 x 2V500AH Batteries + Rack: N6,534,000

×

Features

Inverter Output

PT-INV-10KVA/8KW/48V-Color LED, Wall-V
8.0KW
24.0KW
Pure Sine wave/Same as input(Bypass Mode)
>88%(Peak)
>95%
0.9-1.0
100-110-120Vac / 220-230-240Vac
±10% RMS
50Hz ± 0.3Hz/60Hz ± 0.3Hz
Yes( 1sec after fault )
10ms(Max)
< 10%

DC Input

24.0Vdc / 48.0Vdc
*2 for 24Vdc, *4 for 48Vdc;
10.5Vdc / 11.0Vdc for 12Vdc Mode
10.0Vdc / 10.5Vdc for 12Vdc Mode
>16.0Vdc for 12Vdc Mode
15.5Vdc for 12Vdc Mode
< 25 W when Power Saver On.(Refer to Table )

Charger

Depends on battery type (Refer to Table 2.5.2)
40A
80 ± 5A
*2 for 24Vdc, *4 for 48Vdc;

BTS

Yes(Refer to the table ) Variances in Charging Voltage & S.D Voltage Base on the Battery Temperature.

Bypass & Protection

Sine wave (Grid or Generator)
230Vac
150VAC For 120Vac LV Mode;300VAC For 230Vac HV Mode;
50Hz or 60Hz
47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz
55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz
Circuit Breaker
Circuit Breaker
50A
80Amp for UL
Yes (Optional)
40Amp

Solar Charger (Optional)

12Vdc / 24Vdc / 48Vdc
15-30Vdc / 30-55Vdc / 55-100Vdc
40 ~ 60A
15A
< 10mA
( *2 for 24Vdc, *4 for 48Vdc)
0 ~ 40℃(Full load) 40 ~ 60℃(Derating)

Specifications

Wall Mount
588*415*200mm
76+2.5
760*540*410mm
62+2.5
Status LEDs / Status LEDs+LCD
1 Year

×

Specifications

Inverter Output

PT-INV-10KVA/8KW/48V-Color LED, Wall-V
8.0KW
24.0KW
Pure Sine wave/Same as input(Bypass Mode)
>88%(Peak)
>95%
0.9-1.0
100-110-120Vac / 220-230-240Vac
±10% RMS
50Hz ± 0.3Hz/60Hz ± 0.3Hz
Yes( 1sec after fault )
10ms(Max)
< 10%

DC Input

24.0Vdc / 48.0Vdc
*2 for 24Vdc, *4 for 48Vdc;
10.5Vdc / 11.0Vdc for 12Vdc Mode
10.0Vdc / 10.5Vdc for 12Vdc Mode
>16.0Vdc for 12Vdc Mode
15.5Vdc for 12Vdc Mode
< 25 W when Power Saver On.(Refer to Table )

Charger

Depends on battery type (Refer to Table 2.5.2)
40A
80 ± 5A
*2 for 24Vdc, *4 for 48Vdc;

BTS

Yes(Refer to the table ) Variances in Charging Voltage & S.D Voltage Base on the Battery Temperature.

Bypass & Protection

Sine wave (Grid or Generator)
230Vac
150VAC For 120Vac LV Mode;300VAC For 230Vac HV Mode;
50Hz or 60Hz
47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz
55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz
Circuit Breaker
Circuit Breaker
50A
80Amp for UL
Yes (Optional)
40Amp

Solar Charger (Optional)

12Vdc / 24Vdc / 48Vdc
15-30Vdc / 30-55Vdc / 55-100Vdc
40 ~ 60A
15A
< 10mA
( *2 for 24Vdc, *4 for 48Vdc)
0 ~ 40℃(Full load) 40 ~ 60℃(Derating)

Specifications

Wall Mount
588*415*200mm
76+2.5
760*540*410mm
62+2.5
Status LEDs / Status LEDs+LCD
1 Year

×

Inverter Output

PT-INV-10KVA/8KW/48V-Color LED, Wall-V
8.0KW
24.0KW
Pure Sine wave/Same as input(Bypass Mode)
>88%(Peak)
>95%
0.9-1.0
100-110-120Vac / 220-230-240Vac
±10% RMS
50Hz ± 0.3Hz/60Hz ± 0.3Hz
Yes( 1sec after fault )
10ms(Max)
< 10%

DC Input

24.0Vdc / 48.0Vdc
*2 for 24Vdc, *4 for 48Vdc;
10.5Vdc / 11.0Vdc for 12Vdc Mode
10.0Vdc / 10.5Vdc for 12Vdc Mode
>16.0Vdc for 12Vdc Mode
15.5Vdc for 12Vdc Mode
< 25 W when Power Saver On.(Refer to Table )

Charger

Depends on battery type (Refer to Table 2.5.2)
40A
80 ± 5A
*2 for 24Vdc, *4 for 48Vdc;

BTS

Yes(Refer to the table ) Variances in Charging Voltage & S.D Voltage Base on the Battery Temperature.

Bypass & Protection

Sine wave (Grid or Generator)
230Vac
150VAC For 120Vac LV Mode;300VAC For 230Vac HV Mode;
50Hz or 60Hz
47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz
55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz
Circuit Breaker
Circuit Breaker
50A
80Amp for UL
Yes (Optional)
40Amp

Solar Charger (Optional)

12Vdc / 24Vdc / 48Vdc
15-30Vdc / 30-55Vdc / 55-100Vdc
40 ~ 60A
15A
< 10mA
( *2 for 24Vdc, *4 for 48Vdc)
0 ~ 40℃(Full load) 40 ~ 60℃(Derating)

Specifications

Wall Mount
588*415*200mm
76+2.5
760*540*410mm
62+2.5
Status LEDs / Status LEDs+LCD
1 Year

×

FAQ

×

Software files

×

Refer product to friend

Name *
Email *
Friend name *
Friend email *
Message *

Message text should not be more than 500 characters.

× ×

Add Review

Review *

Message text should not be more than 500 characters.

Show My Name
 No  Yes
Captcha *


×

Frequently Bought Together & Other Accessories

4 x 12V200AH Battery Rack

Enclosure for Stacking Batteries

45,900.00